3-Point Hitch Conversion Buying Guide

Add a 3-point hitch to your vintage tractor and run modern 3-point implements. This guide lists every hitch conversion we sell, which tractors each one fits, and what's included. Our hitches are made in the USA, and we have sold and installed them since 2000. Not sure which one you need? Call us at 877-378-6543 (Monday–Friday, 9:00 AM–6:00 PM Central) with your model and serial number.

Drawbar-mounted or quick hitch?

Drawbar-mounted: the strongest option. A mainframe bolts to your existing drawbar (some models need one hole drilled) and a sway block gives positive sway control without chains. Your drawbar stays in place and Traction Booster still works.
Quick (snap-coupler) hitch: the easiest to fit and remove. It locks into your snap coupler, so the snap-coupler drawbar must come off. Traction Booster still works, but sway control is limited.
New-style (WD and WD45 only): like the drawbar-mounted hitch, but the mainframe bolts to the bottom of the tractor at the drawbar support brackets.

More detail: Which hitch fits my Allis-Chalmers tractor · ASAE 3-point hitch specifications · Dimensions: Allis-Chalmers 3-point hitch, wheel and manifold data

Allis-Chalmers 3-point hitch conversions

Tractor	Hitch	Type	Included / notes
B, C	B and C 3-point hitch conversion (cm0055)	Bolts to factory drawbar	Includes 2" x 8" hydraulic cylinder, shortened adjustable top link and bracket. Tractor must have hydraulics. Drawbar stays fully usable. Heavy rear-balanced implements may lift the front end.
CA	Drawbar-mounted hitch, CA only (cm0057-ca)	Drawbar-mounted	Needs the drawbar support. CAs left the factory with several lift setups, so please call to confirm before ordering. Top link bracket available as an option.
CA	Cross Mfg CA light 3-point (CM0050)	Quick (snap coupler)	Includes 2 leveling arms. Also available in a non-snap-coupler (pin hitch) version. Top link bracket available as an option. The safer choice if you are unsure.
WD, WD45	Drawbar-mounted hitch for WD and WD45 (cm0057)	Drawbar-mounted	Mainframe, 2 lift arms (tugs), 2 leveling arms, sway block. Drawbar, drawbar support, top link and bracket not included; top link bracket available as an option.
WD, WD45	New-style hitch, WD and WD45 only (CM0056)	New-style	Mainframe bolts to the bottom of the tractor; 2 lift arms, 2 leveling arms, sway block. Top link and bracket not included; bracket available as an option.
WD, WD45	Medium / Quick hitch (CM0060)	Quick (snap coupler)	Lift arms 5/8" x 3". Snap-coupler drawbar must be removed. Also available in a non-snap-coupler version. Top link and bracket not included; bracket available as an option.
D10, D12	Drawbar-mounted hitch for D10 and D12 (cm0057-d10)	Drawbar-mounted	Mainframe, 2 lift arms, 2 leveling arms, sway block. Drawbar, drawbar support, top link and bracket not included.
D14, D15, D17 (to Series III)	Drawbar-mounted hitch for D14, D15, D17 (cm0057)	Drawbar-mounted	Mainframe, 2 lift arms, 2 leveling arms, sway block. On D15 Series II and D17 Series III the drawbar support acts as sway control. D14/D15 and D17 top link brackets available as options.
D14, D15, D17	Medium / Quick hitch for snap coupler (CM0060)	Quick (snap coupler)	Lift arms 5/8" x 3". Top link and bracket not included; D17 bracket available as an option.
D17 Series IV	Heavy-duty 3-point, D17 Series IV (cm0058)	Heavy-duty, sway block	1" x 3" lift arms (tugs), leveling adjusters. Drawbar, top link and bracket not included; bracket available as an option.
D19	Heavy-duty 3-point, D19 (cm0058-d19)	Heavy-duty, sway block	1" x 3" lift arms (tugs), leveling adjusters. Drawbar, top link and bracket not included; bracket available as an option.
D17 Series IV, D19	Heavy / Quick hitch for snap coupler (CM0061)	Quick (snap coupler)	Lift arms 3/4" x 3". Top link and bracket not included; D17 Series IV and D19 brackets available as options.

Most Allis-Chalmers hitches don't include the top link or top link bracket — choose a bracket option on the hitch's page when ordering, or see Allis-Chalmers parts.

Farmall / IH 3-point hitch conversions

Tractor	Hitch	Included / notes
C, Super C, 200, 240	Farmall C / Super C / 200 / 240 hitch (cmfarmallc)	Shortened adjustable 3rd link included, plus rods and chains for the cultivator lift. Ships UPS in 3 bundles.
H, 300, 350	Farmall H / 300 / 350 hitch (cmfarmallh)	Includes 1 hydraulic cylinder and top link (hose not included). Your drawbar stays on the tractor.
M, 460, 560	Farmall M / 460 / 560 hitch (cmfarmallm)	Includes 2 hydraulic cylinders. Fits Wheatland models; row-crop models need spacer blocks and notching for the PTO handle — call before ordering. Drawbar stays on the tractor.

Have a Farmall/IH Fast Hitch? See our Fast Hitch to 3-point adapters in Farmall/IH 3-point hitch conversions.

John Deere 3-point hitch conversions

Tractor	Hitch	Included / notes
A (SN 584000 and up), B (SN 186134 and up), G (SN 18700 and up), 50, 60, 70 with exposed rockshaft	Deere A / B / G / 50 / 60 / 70 hitch (cmdeerea)	For Category 2 implements with a Category 1 top link bracket; works with Category 1 using 2 reducer bushings. Top link not included. Ships UPS in 3 packages.
M, MT	Deere M / MT hitch (cmdeerem)	Complete bolt-on, no modifications to the tractor. Ships UPS in 1 package.
520, 530, 620, 630, 720, 730	Deere 520–730 hitch (cmdeere520)	Complete bolt-on, no modifications to the tractor. Ships UPS in 2 packages.

Shipping

Hitches ship by UPS, unboxed, which meets UPS requirements — boxes tend to rupture under the weight and odd shapes. UPS handling often scratches the paint and UPS won't insure against it, so plan to touch up or repaint if you want a show finish. More in our FAQ and Shipping & Orders.

Still not sure?

Call 877-378-6543 with your tractor model, serial number, and whether it has a snap coupler or a drawbar support. We know these hitches well and will help you choose the right one the first time.